800HP 3PH 5810B 1800 TEFC 460V CI

MAX-E1®

Features:
• Enclosure: Totally Enclosed Fan Cooled (IP55)
• Voltage: 460V
• Any Severe-Duty / Petro-Chem / Pulp & Paper Application
• Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
• CSA Certified for Class I, Div. 2, Groups A, B, C, D – Temp Code T2D Minimum
• CSA Certified for Class II, Div. 2, Groups F & G – Temp Code T3C Minimum
• Class F Insulation
• Class B Temperature Rise
• NEMA Design B Torques
• Cast Iron Frame, End Brackets & Pressed Steel Fan Cover and Plate Main Conduit Box
• Oversized Fabricated Steel Main Conduit Box Rotatable in 90 Degree Increments, Fully Gasketed with NPT Threaded Entrance – F1 Mounted, Field Convertible to F2 and F3
• Oversized Main Conduit Box Rotatable in 90 Degree Increments
• Designed for 40˚C Ambient Temperature
• Designed for 3300 ft. Elevation
• Bi-Directional Rotation (Except 2 Pole motors, which are Counter-Clockwise facing the Drive End)
• 1045 Carbon Steel Shaft
• Aluminum Die Cast Squirrel Cage Rotor Construction or Copper Bar Rotor Construction
• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
• Paint Color: Light Gray – Munsell N5.0
• High Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM
• Automatic Grease Discharge Fittings
• Metal Flinger on Both Ends
• Cast Iron Inner and Outer Bearing Caps
• Stainless Steel Nameplate
• Dual Column Design Nameplate as Standard (60/50 Hz)
• 6 Leads
• Motors are CSA Approved
• Dual Drilled or Tri-Drilled Feet Available on Most Ratings (e.g., 5009 Drilled also for 5007)
• Pre-Formed Random Wound, Made of High Pulse Endurance Index Wire, CIV Tested to 2000V/0.1us
• Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2
• Inverter Duty Speed Range: 10:1 Variable Torque, 3:1 Constant Torque
• 2-Pole Motors 400 HP and Larger Standard Features: 100 Ohm Platinum Stator RTDs (2/Phase), Space Heaters (120V), and Insulated Non-Drive End Bearings
• Catalog Numbers Ending in “R” Come Standard with Roller Bearings for Belted Applications
• Spotface ¼ -28 UNF Tap x 12mm Deep on Top of Both End Brackets with VB300 Vibration Sensor on 5000 Frames and Larger