75HP 3PH 365T 1800 TEFC 208-230/460V SG 364T CI

MAX-PE™

Features:
• Enclosure: Totally Enclosed Fan Cooled (IP54)
• Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only¹
• Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
• CSA Certified for Class I, Div. 2, Groups B, C, D – Temp Code T3C
• Class F Insulation
• Class B Temperature Rise
• NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
• Cast Iron Frame and End Brackets; Rolled Steel Fan Cover and Main Conduit Box
• Grounding Terminal Inside Main Conduit Box
• Oversized Main Conduit Box Rotatable in 90° Increments – F1 Mounted
• Designed for 40˚C Ambient Temperature²
• Designed for 3300 ft. Elevation³
• Bi-Directional Rotation
• 1045 Carbon Steel Shaft
• Aluminum Die Cast Squirrel Cage Rotor Construction
• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
• Paint Color: Dark Gray – Munsell 7.5B 3.5/0.5
• Double Shielded Bearings Pre-Packed with MULTEMP SRL for Frames 140T – 280T (Non-regreasable)
• High-Quality Ball or Roller Bearings Regreasable with Mobil Polyrex™ EM for Frames 280TS and Larger
• Automatic Grease Discharge Fittings on Regreasable Models for Frames 280TS and Larger
• Rubber Dust Flinger on Drive-End for Frames 140T – 280T
• Metal Flinger on Both Ends for Frames 280TS and Larger
• Cast Iron Inner and Outer Bearing Caps for Frames 280TS and Larger
• Stainless Steel Nameplate
• Dual Column Design Nameplate as Standard (60/50 Hz)
• Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2(4,5)
• Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
• 9 Leads for 5 HP and Smaller
• 12 Leads for 7.5 HP to 125 HP
• 6 Leads for 150 HP and Larger
• Motors are U.L. Recognized, CSA Approved, and CE Marked
• Dual Drilled Feet Available on Most Ratings – Longer Frames (e.g., 145T Drilled Also for 143T)
• Provisions for Breather Drains for Vertical Mount Down (Frames 324T and Larger)
• Rubber Dust Flinger on Drive-End for Frames 140T – 280T