60HP 3PH 364T 1800 TEFC 460V CI

MAX-E2/841® LITE

Features:
• Enclosure: Totally Enclosed Fan Cooled (IP55)
• Voltage: 460V Only
• Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
• CSA Certified for Class I, Div. 2, Groups B, C, D – Temp Code T3 Minimum
• CSA Certified for Class II, Div. 2, Groups F & G – Temp Code T3 Minimum⁵ (444T and above)
• IEEE 841 Ready
• Meets IEEE 45 Marine Duty
• Class F Insulation
• Class B Temperature Rise
• NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
• Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box
• Grounding Terminal Inside Main Conduit Box with Additional Foot Grounding Provision
• Oversized Main Conduit Box Rotatable in 90° Increments – F1 Mounted
• Designed for 40˚C Ambient Temperature¹
• Designed for 3300 ft. Elevation²
• Bi-Directional Rotation
• 1045 Carbon Steel Shaft
• Aluminum Die Cast Squirrel Cage Rotor Construction
• Paint System: 2 Part Epoxy
• Paint Color: Blue – Munsell 5PB 3/8
• High-Quality Ball (or Roller) Bearings Regreasable with Mobil Polyrex™ EM
• Automatic Grease Discharge Fittings
• Rubber Dust Flinger on Drive End for Frames 140T – 280T
• Oil Seal/V-Ring on Both Ends for Frames 320T – 400T
• Metal Flinger on Both Ends
• Cast Iron Inner and Outer Bearing Caps for Frames 400T and Larger
• Stainless Steel Nameplate and Hardware
• Stainless Steel Automatic Breather Drain
• Dual Column Design Nameplate as Standard (60/50 Hz)
• Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 (3,4)
• Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
• Motors are U.L. Recognized, CSA Approved
• 3 Leads Only
• Dual Drilled Feet Available on Most Ratings – Longer Frames (e.g., 145T Drilled also for 143T)
• Vibration Not to Exceed 0.08 Inches Per Second
• Noise Level Not to Exceed 85 dB(A) at 1 Meter Unloaded