1.5HP 3PH 143T 3600 TEFC 208-230/460V CI
Mfr # EP1/525 | Wright’s # TEC EP1/525
1.5HP Severe Duty Motor, 3 Phase, 143T Frame, 3600 RPM, TEFC Enclosure, 208-230/460V
$355.69
Product Information
Specifications
Description
MAX-E1® FAMILY
Features:
• Enclosure: Totally Enclosed Fan Cooled (143T – 286T, IP54) / (286TS – 449T, IP55)
• Voltage: 230/460V (Usable on 208V); 150HP and Larger is 460V Only
• Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
• CSA Certified for Class I, Div. 2, Groups B, C, D – Temp Code T3 Minimum
• CSA Certified for Class II, Div. 2, Group F & G – Temp Code T3 Minimum (444 Frame and Larger)
• Class F Insulation
• Class B Temperature Rise
• NEMA Design B Torques as a Minimum; Various Ratings also Meet Design C
• Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box
• Grounding Terminal Inside Main Conduit Box
• Oversized Main Conduit Box Rotatable in 90° Increments – F1 Mounted
• Designed for 40˚C Ambient Temperature³
• Designed for 3300 ft. Elevation⁴
• Bi-Directional Rotation (Except 2 pole, #5000 and Larger Ratings are Counter-Clockwise Facing the DE)
• 1045 Carbon Steel Shaft
• Aluminum Die Cast Squirrel Cage Rotor Construction for Frames 140T – 449T
• Copper/Copper Alloy Rotor Construction for Frames 5000 and Larger¹⁰
• Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
• Paint Color: Light Gray – Munsell N5.0
• Double Shielded Bearings Pre-Packed with MULTEMP SRL for Frames 140T – 280T (Non-regreasable)
• High-Quality Ball or Roller Bearings Regreasable with Mobil Polyrex™ EM for Frames 280TS and Larger
• Automatic Grease Discharge Fittings on Regreasable Models
• Metal Flinger on Both Ends for Frames 286TS and Larger
• Cast Iron Inner and Outer Bearing Caps for Frames 280TS and Larger
• Stainless Steel Nameplate
• Dual Column Design Nameplate as Standard (60/50 Hz)
• Suitable for Inverter Use per NEMA MG-1 Part 31.4.4.2 (5,6)
• Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque (350 HP and Larger are 3:1 Constant Torque)
• 9 Leads for 5 HP and Smaller
• 12 Leads for 7.5 HP to 125 HP
• 6 Leads for 150 HP and Larger
• Motors are U.L. Approved, CSA Approved, ABS Design Assessment from 250HP-500HP
• Dual Drilled Feet Available on Most Ratings (Longer Frames, e.g., 145T Drilled Also for 143T)
• Rubber Dust Flinger on Drive-End for Frames 140T – 280T
• Catalog Numbers Ending in “R” Come Standard with Roller Bearings for Belted Applications.
